The Orbi RBS50 is an AC3000 satellite that uses the tri-band technology to provide ultimate WiFi experience. It receives the signals from outer and provides it to every corners of your house which are hard to reach. Today, you will learn how to complete Orbi RBS50 setup and login process at home. This blog teach you every step in detail. Just read the blog properly and don’t miss any step and method.
Attach Orbi RBS50 Satellite to Router
You will found a satellite and power adapter inside the Orbi RBS50 Setup package. If you have already installed router which connected with modem, then use the steps given below to connect Orbi satellite. There are two methods to connect the satellite to the router.
• Ethernet Backhaul Connection
• Wireless Connection
Ethernet Backhaul Connection
In the wired connection, we use the wire connection between router and satellite. It provides more internet speed compare to wireless connection, because there is no interference between devices. You can also use the Orbi AP Mode to connect. Steps to connect:
1. Take an Ethernet cable; connect its one side to satellite.
2. And another side is to the router’s internet port.
3. Ensure that during connection power of the router and satellite are turned off.
4. When you connect the cable, turn on both the devices.
See the image given below to understand Backhaul Ethernet
Wireless Connection
In the Wireless Connection, we attach the Orbi satellite to the router with syncing process. If you don’t know how to perform syncing process, then follow the steps given below:
1. Make sure the router’s power is on.
2. Temporary establish the satellite close to the router.
3. First hit the sync button of the router.
4. Then after few seconds, push the sync button of satellite.
5. A light is start blink on both the devices.
6. When this light turn stable, means the satellite is connect with router
After complete the syncing process, move the satellite at low network area. If you are want to connect more satellite, then use the same process that give above. Just make sure to keep the satellites at a proper distance. You can also use these methods for Orbi outdoor satellite setup.
Login to Orbi Satellite
If you want to update and manage settings of your Orbi satellite then you can do these by login into the satellite. There are two methods to access the satellite setup page. First is via web interface and second is with Orbi App. Read the further section to understand login process.
Via Web Interface
• Make sure that the device is connect to the Orbi devices.
• Type orbilogin.com or orbilogin.net into the address bar of web browser.
• Use the label or user manual to check the username and password.
• Fill these detail into login field and click on the Login button.
• When you will enter the setup page, then add the satellite by following onscreen instruction.
Via Orbi App
• Connect the mobile device with Orbi WiFi network.
• Get the Orbi app from any platform.
• Login with default username and password that given on label and username.
• Enter the model and serial number of the satellite.
• And configure the satellite with app.
Orbi app is the easiest way to configure the satellite, on this app or interface you can manage the different types of settings and solve problem related to the Orbi RBS50 satellite.
How to Change Orbi Admin Login Detail?
To set a new Admin username and password or change the login detail, follow the instruction given below:
1. Go to the setup page of the Orbi by login into the orbilogin.com or orbilogin.net.
2. On the interface, click on the setting and then advanced settings.
3. Select the Administrative; here you will set the new Username and password.
4. And click on Apply button.
On the interface, you can also set and change the WiFi network password. By following all the above methods, you can complete the Orbi RBS50 setup and manage.
Conclusion
In the above blog, you learned steps to complete Orbi RBS50 Setup and login process. We also provide how to set and change admin password of Orbi.
