Skip to content
Home » Blog » Why RB20 Appears Good but seems to Fail? Want a solution

Why RB20 Appears Good but seems to Fail? Want a solution

Reading Time: 4 minutes

Orbi RB20

Introduction

The Netgear Orbi RB20 is a compact, easy to set up, a budget-friendly way to expand your home’s WiFi. But here’s the honest answer to the question: it appears good on the surface, but in real-world use, the Orbi RB20 tends to fall short. Whether it’s dropped signals, limited range, or unreliable performance from the satellite, the cracks show up fast once you start using it daily.

If you’re wondering why your Orbi RB20 setup isn’t delivering the seamless WiFi it promised, the problem isn’t always setup-related—it’s in the hardware limits, which is the way about how to connect Orbi satellite with the router. In this guide, we’ll break down what’s really happening, what you can do to fix it, and how to make your RB20 setup run as smooth as it should have from the start.

What the Orbi RB20 Promises

RB20 seems has a mesh system that provides you with:

  • Dual-band WiFi
  • Up to 4,000 sq. ft. coverage (with satellite)
  • Dedicated backhaul for better data flow
  • Easy setup via the Orbi app

At face value, it’s a neat little system for a small to mid-sized home. It’s budget-friendly, and it uses the same app and platform as higher-end Orbi models. But because of some technical issues it tends to loose its value.

Where It Falls Apart: The Real-World Issues

1. Weak Signal from the Orbi RB20 Satellite

One of the biggest complaints? The Orbi RB20 satellite doesn’t live up to its range promise. Even when placed within the recommended 30–40 feet of the main unit, signal drops and slow speeds are common—especially across walls or in multi-story homes. And then you wonder: Isn’t this supposed to eliminate dead zones?

2. No Tri-Band Support

Unlike higher-end Orbi models, the RB20 lacks tri-band WiFi. This means your main router and satellite are fighting for the same bandwidth as your devices. That results in slower speeds, especially if multiple devices are active. If you’re streaming 4K, gaming, or have a smart home setup, the Orbi RB20 might not keep up.

3. Firmware Glitches and App Delays

The Orbi app should make setup easy—but for many RB20 users, it’s the opposite. The app sometimes fails to detect the satellite or freezes during firmware updates. Add that to login some minor errors, and you’ll have to reboot your router more often than you’d like.

4. Limited Customization and Admin Controls

Advanced users often find the RB20 interface lacking. It doesn’t offer much beyond basic parental controls and device pausing. Compared to more robust routers, the admin options are very limited. If you like tweaking settings, configuring port forwarding, or adjusting QoS, the RB20 might feel frustratingly basic.

Is the Problem the Hardware… or the Expectation?

To be fair, the Netgear Orbi RB20 is known as a budget mesh system. So, some limitations are expected. But Netgear’s own marketing sometimes blurs that line, suggesting it can handle more than it realistically can. This mismatch between expectations and actual performance is what causes most of the frustration.

Troubleshooting: How to Get the Best Out of It (If You Already Own One)

If you’ve already invested in the RB20 system, here are a few tips to get the best performance out of it:

  • Place the Satellite in Clear View: Avoid placing it behind walls or large furniture. Elevate it if possible.
  • Keep Devices Updated: Make sure both the app and firmware are updated —this helps with sync and signal stability.
  • Reboot Weekly: Regular reboots (yes, old-school trick) can help clear out temporary bugs.
  • Reduce WiFi Congestion: If possible, turn off devices that don’t need to stay connected 24/7.
  • Use Ethernet Backhaul: If you can run a cable between the router and satellite, you’ll notice a big boost.

Who Should Not Buy the RB20?

If any of these apply to you, the RB20 likely won’t cut it:

  • You work from home and rely on consistent video calls or cloud access.
  • You have a large home (2,000+ sq. ft.) with thick walls or multiple floors.
  • You game online or stream in 4K on multiple devices.
  • You want strong admin features, VPN access, or firewall controls.

In those cases, step up to a tri-band model or a more powerful mesh system.

Final Word

The Netgear Orbi RB20 isn’t a terrible device—it just has a narrow sweet spot. For small homes with light usage, it can be okay. But if you expect high performance or whole-home coverage without compromise, you’ll probably be left disappointed. The Orbi RB20 satellite struggles with range, lacks advanced features, and can be buggy with firmware or app updates.

FAQs

You can, but they must be compatible. Adding a tri-band Orbi satellite to a dual-band RB20 base won’t magically improve performance—it may still bottleneck due to shared bandwidth.

Not really. It lacks QoS (Quality of Service) controls and has weaker throughput under load. Gamers will notice lag, especially with multiple users on the network.

This usually happens due to distance between units, firmware bugs, or interference from nearby networks. Rebooting, updating, or repositioning can help.

Yes, you can, as connecting the satellite to the main router using an ethernet wire increases stability and speed of the internet very significantly.
author-image

George

Author

I'm George, a technical writer with 5+ years of experience creating engaging blogs and articles. I specialize in simplifying complex concepts and delivering clear, user-friendly content. With experience working with companies like Shopify and Zapier, I bring strong communication skills and technical expertise to every project. Thanks for visiting, and I hope you enjoyed my work!